To see what’s in /dev, launch Terminal.app and use the command “ls /dev” before and after, and look for the added device name, and post that here. This device name is the way that somebdoy can write this app for you. That is, plesse post the name of the device created when the USB adapter is plugged into the Mac, this name can be found in the device documentation, or by listing out and comparing the devices in /dev directory before and after connecting the device. Please post the device name of the device involved here. The two salient differences being first where the printing output is directed (to the device associated with the connection to the printer, not to the user’s own default output device), and that the data is not intended to be human-readable it’s a fixed and known string containing binary data (that the printer will read and understand). This app is a variant of an app containing a print statement, implemented in the particular chosen language. All output is fine to our terminal (using CoolTerm, with a verified cable) up to the Buildroot login prompt, but no input to allow us to login (either. That is, write a program that opens up the USB adapter serial device, write the string containing the binary data for the desired new projector state, and then exit. With the Arduino prepared and plugged into our computer, open CoolTerm and select OPTIONS. The general sequence used in the app? Open the serial device for output (or open the device for both input and output, if you want to first read the projector state before updating the projector state), write the bytes to the projector to update the state, fhen exit. Next, download CoolTerm from Roger Meier’s website. Your choices here are to learn how to program this yourself, or to find some existing open source code or a xommercial tool that controls the projector and use or adapt that, or to appeal to charity and somebody else that eill write the Python or ash or AppleScript or Objective C or Swift code for you, or to pay somebody to write the code on your behalf. This would be extreme diy, since you would have to wire all the pins just you you could jumper what you need. In order to jumper the pins, you need something like this.Ī: DB9 Breakout Connector RS232 Serial 9 Pin Connector Db9 Terminal (Male x 1, Female x 1): Home Audio & Theate… This will show you the pins, but it's not possible to jumper pins together. Don't know how effective it would be at higher speeds.Ī: CableMax RS-232 LED link Tester DB-9 Male to DB-9 Female: Computers & Accessories I used the box at slower speeds than 19.2k. You then need to find a breakout box that supports your pins. You need to count the number of pins on your connector. This is for a 25 pin connector which is called a db25 connector. Here is the breakout box, my "blue box", that I remember: I think you need at a minimum, a break out box to see if there is any activity on the lines. A retired person who wants to figure this out. Your going to have to find someone to assist you. The manufacture of your projector had a lot of documentation, but wasn't end-to-end.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |